TIGERSHARK SYSTEM / QUICKBALL™
QuickBall™
A compact quick-release link for 1-inch underwater arm systems.
Place QuickBall between two compatible clamps to add a removable, repositionable joint without rebuilding the whole arm.
Two 1-inch ball ends · Central TIGERSHARK quick-release interface
1-year quality warranty · Lifetime service support
Two standard 1-inch ball ends
Magnetic guidance
Mechanical twist-lock
Approx. 59.5 g
THE QUICK-RELEASE LINK
Keep the clamps.
Change the connection.
Traditional 1-inch ball clamps are reliable and widely used, but changing an arm or light often means loosening several parts. QuickBall places one deliberate separation point inside that familiar system.
Remove a section, reposition an accessory or rebuild the rig while leaving the surrounding clamps and ball-arm language intact.
HOW IT WORKS
Bring close.
Align. Lock.
Bring the two modules together, rotate into engagement and continue until fully seated. Confirm the lock before entering the water.
The magnet guides the connection. The mechanical structure secures it. Always confirm the lock before entering the water.
PRODUCT DEMONSTRATION
See QuickBall in action.
SYSTEM COMPATIBILITY
Standard ball ends.
One modular interface.
QuickBall works inside the familiar 1-inch clamp ecosystem while connecting to compatible TIGERSHARK modules through the shared interface.
Explore the TIGERSHARK system ↗TECHNICAL DATA
Clear enough
to decide.
QuickBall is a compact link, not a complete arm. Check the ball standard, available space and total payload before ordering.
- Configuration
- Double-ended quick-release arm link
- Ball standard
- 1 inch / 25 mm at both ends
- Overall length
- Approximately 3 in / 76 mm
- Weight
- Approximately 59.5 g
- Body material
- CNC-machined aluminum alloy
- Interface
- Magnetic guidance + mechanical twist-lock
- Finish
- Black anodized for marine environments
- Intended use
- Compatible underwater camera-arm clamps, lights and accessories
1 × complete QuickBall™ assembly
Clamps, arms, lights and other modules shown are sold separately.
POST-DIVE CARE
Fresh water.
Moving parts.
Every saltwater dive.
Rinse thoroughly, operate the external collar during rinsing, remove visible sand or salt, and allow the product to dry before storage. Never force a connection that feels abnormal.
Read care and safety guidance ↗BEFORE YOU ORDER
Questions worth answering.
01Is QuickBall held together only by magnets?+
No. The magnets guide the two sides into position. The working connection is secured by the mechanical twist-lock. Always rotate the collar fully and check the connection before entering the water.
02Will QuickBall fit my existing clamps?+
QuickBall uses a standard 1-inch ball at each end and is intended for compatible underwater camera-arm clamps. Clamp shape, condition and load still matter, so contact us with a photo if you are unsure.
03Does QuickBall replace a complete camera arm?+
No. QuickBall is a compact link that sits between two compatible 1-inch clamps. It adds a removable joint within an existing arm, light or accessory setup.
04Can I use it with a heavy strobe or video light?+
Suitability depends on the complete setup, including clamp holding force, arm geometry, payload and water movement. Test the assembled rig before diving and ask us to check unusually heavy configurations.
05What should I do if sand enters the moving area?+
Do not force the collar. Rinse thoroughly in fresh water while operating the external moving parts, remove visible debris and confirm smooth movement before the next dive.
ADD THE QUICK-RELEASE POINT